Home / Consumer Products / Hi-End Audio / Fully Manual Belt-Drive Turntable - AT-LPW30BK

Fully Manual Belt-Drive Turntable

AT-LPW30BK

Optimal High-Fidelity Audio Reproduction
Sophisticated Styling

  • Fully manual operation, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast aluminum platter with rubber mat
  • AT-HS4 headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
  • AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance MDF (medium density fiberboard) plinth with black wood veneer
  • Built-in switchable phono pre-amplifier for phono or line-level output
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

    The AT-LPW30BK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with black wood veneer to limit low-frequency acoustical feedback.

    The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal ½"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 60 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

    The AT-LPW30BK is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.



    • AT-LPW30BK Specifications

    Type

    Belt-drive manual turntable
    Motor

    DC servo
    Drive method

    Belt drive
    Speeds

    33-1/3 RPM, 45 RPM
    Turntable Platter

    Die-cast aluminum
    Wow and Flutter

    < 0.15% WRMS (33 RPM), 3kHz
    Signal-To-Noise Ratio

    > 60 dB
    Maximum Output Level

    Pre-amp (PHONO) 4.0 mV nominal at 1 kHz, 5 cm/sec
    Pre-amp (LINE) 200 mV nominal at 1 kHz, 5 cm/sec
    Gain

    35 dB nominal, RIAA equalized
    Power Supply

    12 VDC ; Power Adapter 100~240 V, 50/60 Hz, 0.5 A Max.
    Dimensions

    420.0 mm (W) x 340.0 mm (D) x 116.9 mm (H)
    Weight

    3.90 kg
    Accessories Furnished

    Dust cover, Platter, Turntable mat, Drive belt,
    Counterweight, AT-HS4 headshell, AT-VM95C stereo cartridge,
    45-RPM adapter, RCA audio cable, AC adapter, Dust cover hinges

    AT-LPW30BK Tonearm/Cartridge/Headshell Spec.

    Tone Arm Type

    Static balanced straight aluminium pipe tonearm
    Effective Arm Length

    223.6 mm
    Height of Tonearm Adjustment Range

    18.6 mm
    Tracking Error Angle

    Less than 2°
    Anti-skating Range

    0 ~ 3 g
    Applicable Cartridge Weight

    12 ~ 17 g
    Replacement Styli

    AT-VMN95C
    Recommend Loading

    47,000 Ω
    Output Voltage

    4.0 mV (at 1 kHz, 5 cm/sec)
    Stylus

    0.6 mil bonded conical stylus
    Tracking Force

    1.8 to 2.2 g (standard 2.0 g)
    Headshell Weight

    6.1 g

    Download

    audio technica support AT-LPW30_CG.pdf - AT-LPW30BK Caution Guide
    audio technica support AT-LPW30_QSG.pdf - AT-LPW30BK Quick Start Guide
    audio technica support AT-LPW30_BK_UM_EN.pdf - AT-LPW30BK User Manual
    • Social