No description

Cardioid Condenser Vocal Microphone

ATM710

  • Tailored for exacting detail, high-fidelity vocal reproduction with maximum impact and intelligibility.
  • Excels in venues with controlled stage volume or in-ear monitoring.
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear,improving isolation of desired sound source.
  • Durable performance for professional applications.
  • Superior anti-shock engineering for low handling noise.
  • Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity.
  • Condenser design for studio-quality performance.
  • Integral 80Hz HPF switch and 10 dB pad.
  • Corrosion-resistant contacts from gold-plated XLRM-type connector.
  • Rugged, all-metal design and construction for years of trouble-free use.

  • ATM710 Specifications

    Element
    Fixed-charge back plate, permanently polarized condenser
    Polar Pattern
    Cardioid
    Frequency Response
    40 ~ 20,000 Hz
    Low Frequency Roll-Off
    80 Hz, 12 dB/octave
    Open Circuit Sensitivity
    -40 dB (10.0 mV) re 1V at 1 Pa
    Impedance
    200 Ω
    Maximum Input Sound Level
    148 dB SPL, 1 kHz at 1% T.H.D.
    Dynamic Range (Typical)
    127 dB, 1 kHz at Max SPL
    Signal-To-Noise Ratio
    73 dB, 1 kHz at 1 Pa
    Phantom Power Requirements
    11-52V DC, 3.5 mA typical
    Switch
    Flat, roll-off; 10 dB pad
    Weight
    274 g
    Dimensions
    179.0 mm - long,50.0 mm - diameter
    Output Connector
    Integral 3-pin XLRM-type
    Accessories Furnished
    AT8470 Quiet-Flex™ stand clamp for ⅝”-27 threaded stand;
    ⅝”-27 to ⅜”-16 threaded adapter;
    Soft protective pouch.

    Download

    audio technica support 294_1_ATM710.pdf - Operation Manual