Home / Consumer Products / Hi-End Audio / Dual Moving Coil Cartridge (Non-Magnetic Core) - AT-ART20

Dual Moving Coil Cartridge (Non-Magnetic Core)

AT-ART20

A new realm of analog sound
Magnetic Core MC with a Superb Sound

  • Provides superlative analog sound reproduction
  • Reproduces sound with the full expressiveness of the original recording
  • Newly designed magnetic circuit improves the cartridge’s efficiency
  • Output voltage is improved by more than 15% without increasing the number of coil turns which can increase mass and impedance.
  • High-quality terminal pins with thick gold plating are approximately 30 times than that of conventional products to reduce contact resistance
  • Constructed of titanium, and aluminum with an elastomer undercover to reduce undesirable resonance
  • Special line contact stylus and solid boron cantilever with a 0.28 mm diameter provide a premium high-frequency response with minimal inner-groove distortion for consistent reproduction
  • Utilizes the advanced cutting and polishing technologies cultivated in the eyeglass industry of Sabae City, Fukui Prefecture, with a history stretching back more than 100 years
  • Threaded cartridge mounting holes allow easy installation to a headshell or integrated tonearm

    * Warranty service WILL NOT be provided for this product.

    AT-ART20 cartridge in our ART Series will allow you to experience a new world of sound. As with previous magnetic core cartridges in our high-end lineup, we had two main goals in developing the AT-ART20: provide superlative analog sound reproduction and optimize the performance and benefits of a magnetic core cartridge.

    Based on cartridge technologies and know-how cultivated over our long history, and employing the best materials and advanced processing techniques, we created a magnetic core moving coil cartridge that’s optimally structured to reproduce sound with the full expressiveness of the original recording.



    • audio technica AT-ART20

    • AT-ART20 Specifications

    Type

    Moving coil cartridge
    Playback Frequency Range

    20 ~ 50,000Hz
    Channel Separation

    30dB (1kHz)
    Output Balance

    0.5dB (1kHz)
    Vertical Tacking Angle

    20°
    Tracking Force

    1.6 - 2.0g (1.8g standard)
    Load Impedance

    >100 Ω (when head amplifier connected)
    Coil Impedance

    12 Ω (1kHz)
    Direct Current Resistance

    12 Ω
    Coil Inductance

    25μH (1kHz)
    Output Voltage

    0.55mV (1kHz and 5 cm/sec.)
    Stylus

    Special Line Contact
    Cantilever

    Ø0.28 mm solid boron
    Static Compliance

    23 x 10-6cm/dyne
    Dynamic Compliance

    13 x 10-6cm/dyne (100Hz)
    Weight

    9.0 g
    Dimensions

    H17.3 x W16.8 x D26.6 (mm)
    Accessories Furnished

    Non-magnetic screwdriver, Washer x 2, Protector, Brush
    cartridge installation screws 5mm x 2, 8mm x 2, 10mm x 2, 12mm x 2

    Download

    audio technica support AT-ART20_UM.pdf - AT-ART20 User Manual
    • Social