Home / Professional Products / Professional Microphones / Beamforming Array Microphone - ATND1061DAN

Beamforming Array Microphone

ATND1061DAN

An ideal solution for conference rooms, boardrooms,
and meeting spaces large and small

  • Powerful onboard DSP: automix, acoustic echo cancelation, noise reduction, automatic gain control, and 4-band EQ
  • User-friendly Digital Microphone Manager software easily configures single or multiple ATND1061DAN microphone settings
  • Six individual output channels with up to 32 user-defined microphone pickup zones provide the flexibility to cover a wide variety of room sizes and meeting types
  • Output Channel 1 can be configured with up to 16 user-defined Coverage Zones to ensure coverage of nonpriority or unplanned participants
  • Output Channels 2–6 can be configured with up to 16 user-defined Priority Zones to ensure priority pickup of participants in known locations
  • Proprietary voice activity detection (VAD) technology enables the microphone to discern between a voice and unwanted noises such as paper shuffling
  • Exclusion zones can be set in the software to avoid known sources of unwanted noise (such as air-handling systems)
  • Dante network audio output
  • Two network ports with Single Cable and Split modes to send Dante audio and microphone control data together or separately over category cable
  • Mounts flush or on the surface of a drop ceiling or hard ceiling, or in open architecture spaces using VESA mount.
  • UL 2043 compliant for installation in plenum spaces
  • Includes tile bridge, safety wiring, and mounting hardware and accessories
  • Low-reflective white finish matches ceiling tiles in most environments
  • Powered by network PoE



    The ATND1061DAN Beamforming Array Microphone is an ideal solution for conference rooms, boardrooms, and meeting spaces large and small. The microphone may be used singly or in multiples (for larger meeting spaces) to capture every person speaking in a room with clear, natural audio that reduces distracting environmental sounds. A state-of-the-art professional product in a familiar form factor (roughly the size of a wireless access point), the ATND1061DAN is easy to install, set up, and operate.
    Room configuration, zone setup, and other settings are handled through the user-friendly Digital Microphone Manager software application. The ATND1061DAN has six individual output channels, which, collectively, can be configured with up to 32 user-defined microphone pickup zones, providing the flexibility to cover a wide variety of room sizes and meeting types.
    Our proprietary voice activity detection (VAD) technology enables the microphone to discern between a voice and unwanted noises such as paper shuffling. For integrations without external digital signal processing (DSP), the ATND1061DAN features powerful onboard DSP, including automix, acoustic echo cancellation (AEC), noise reduction, automatic gain control (AGC), and 4-band EQ.
    Exclusion zones can be set to avoid known sources of unwanted noise (such as air-handling systems), helping to maximize the effectiveness of the built-in noise-reduction and automatic-mixing functions.


    • audio technica ATND1061DAN
    • audio technica ATND1061DAN

    • ATND1061 General Specifications

    Power Supply

    PoE (IEEE 802.3af Class 0)
    Rating Capacity

    Max. 7 W
    Operating Temperature Range

    0°C to 40°C
    Operating Humidity Range

    25% to 85% (Non condensing)
    Dimensions

    227.5 mm × 227.5 mm × 30 mm (W×D×H)
    Weight

    1250 g

    ATND1061 Microphone Specifications

    Beam width

    90°
    Polar Pattern

    Beam pattern
    Frequency Response

    60 Hz ~ 18,000 Hz
    Open Circuit Sensitivity

    -8 dBFS (1 kHz, 94 dB SPL)
    Dynamic Range (Typical)

    89 dB (A-weighted)
    Signal-To-Noise Ratio

    61.5 dB (A-weighted)
    Noise

    25 dB SPL (A-weighted)
    Maximum Input Sound Level

    102 dB SPL

    ATND1061 Analog Audio

    Frequency Response

    20 Hz ~ 20 kHz (+1.0/-2.0 dB)
    Dynamic Range (Typical)

    100 dB (A-weighted)
    Signal-To-Noise Ratio

    80 dB (A-weighted)
    Headroom

    20 dB
    Residual Noise

    -75.8 dBu (A-weighted)
    Total Harmonic Distortion

    <0.1% (1 kHz, unity)
    Audio Input

    MIC Maximum: -30 dBu,
    MIC Unity: -50 dBu,
    LINE Maximum: +12.2 dBu,
    LINE Unity: -10 dBV, Switchable
    Audio Output

    OUTPUT Maximum: +19.2 dBu,
    OUTPUT Unity: +4 dBu/-10 dBV/-33 dBV, Switchable

    ATND1061 Other Specifications

    Network

    Dante: 1 Gbps,
    IP control: 100 Mbps
    Sample Rate

    48 kHz
    Bit Depth

    24 bit
    Latency

    Microphone (CH1 to CH6): 47 ms,
    Microphone (Auto Mix CH): 79 ms,
    Dante: Min. 250 μs, Max. 5 ms
    Connector

    Network/Dante: RJ-45,
    Analog input: Euroblock 3 pin,
    Analog output: Euroblock 3 pin,
    GPI: Euroblock 3 pin
    Phantom Power

    Analog input: 12 V
    Accessories Furnished

  • IR remote controller,
  • Surface mount adapter,
  • Screw (M4 × 50 mm) × 4,
  • Flush mount adapter,
  • Flush mount cover,
  • Screw (M4 × 10 mm) × 12,
  • Hole cover,
  • Nut × 4,
  • Snap bushing × 2,
  • Tile bridge A × 2,
  • Tile bridge B × 2,
  • Tile bridge C × 4,
  • Seismic cable,
  • Zip tie,
  • Safety belt,
  • Euroblock connector × 3,
  • Installation template

    		•

    Download

    audio technica support ATND1061DAN_QSG.pdf - ATND1061DNA Quick Start Guide
    audio technica support DigitalMicrophoneManager ATND1061DAN-UM-EN.pdf - DMM Software User Manual
    audio technica support ATND1061DAN-UM-EN.pdf - ATND1061DNA User Manual
    audio technica support DigitalMicrophoneManager ATND1061DAN-UM-TC.pdf - DMM Software User Manual (Chinese)
    audio technica support ATND1061DAN-UM-TC.pdf - ATND1061DNA User Manual (Chinese)
    audio technica support Digital Microphone Manager.zip - Digital Microphone Manager software
    audio technica support ATND1061DAN_IP_Control_Specification.pdf - ATND1061DAN IP Control Specifications
    audio technica support ATND1061_Dimensions.dwg - ATND1061 Appearance (DWG)
    • Social