AT-LP5X Audio-Technica | Audio-Technica

Fully Manual Direct Drive Turntable

AT-LP5X

Rich analog heritage for next-generation AT-LP5
pushes the acclaimed performance

Direct-drive, low noise motor

Fully manual operation with three speeds: 33-1/3, 45 and 78 RPM

AT-VM95E Dual Moving Magnet stereo cartridge (black) with replaceable stylus

Lightweight AT-HS6 headshell

J-shaped tonearm, modeled after original Audio-Technica designs from the 1960s and ’70s, are engineered to minimize tracking errors

Switchable MM/MC built-in pre-amplifier and line enables connection to components with or without a dedicated phono input

Anti-resonance, die-cast aluminum platter

Heavy rubber damping mat for improved low-frequency reproduction

AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Elegant matte black finish

Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, USB cable

Included dust cover and mounting hardware

AT-LP5X Specifications

Type

3-speed, fully manual operation

Motor

DC servo motor

Drive method

Direct drive

Speeds

33-1/3 RPM, 45 RPM, 78 RPM

Turntable Platter

Die-cast aluminum

Starting Torque

>1.0 kgf.cm

Braking System

Electronic brake

Wow and Flutter

< 0.2% WRMS (33 RPM) at 3 kHz

Signal-To-Noise Ratio

> 50 dB

Maximum Output Level

PHONO - 4 mV nominal at 1 kHz, 5 cm/sec
LINE (MM) - 250 mV nominal at 1 kHz, 5 cm/sec

Gain

Phono Pre-amp gain (MM) - 36 dB nominal, RIAA equalized
Phono Pre-amp gain (MC) - 56 dB nominal, RIAA equalized

USB Function

A/D, D/A : 16 bit 44.1 kHz or 48 kHz USB selectable
Computer interface : USB 2.0 Compliant Windows 7 or above or MAC OSX or above

Power Supply

100 to 240 V, 50/60 Hz, 0.6 A Max.

Rating Capacity

3W

Dimensions

450.0 mm (W) x 352.0 mm (D) x 157.0 mm (H)

Weight

7.3 kg

Accessories Furnished

Dust cover, Rubber mat, Platter, Counterweight,
Headshell (AT-HS6) with VM stereo cartridge (AT-VM95E),
45-RPM adapter, Dust cover hinges,
USB cable (1.9 m), RCA audio cable (approx. 1.0 m),
AC adapter (approx. 1.5 m (AD-SE1220KZ)

AT-LP5X Tonearm/Cartridge/Headshell Specifications

Tone Arm Type

Static balance J-shaped tonearm

Effective Arm Length

247 mm

Height of Tonearm Adjustment Range

17 mm

Tracking Error Angle

Less than 3°

Anti-skating Range

0 ~ 4 g

Applicable Cartridge Weight

15 ~ 20 g

Replacement Styli

AT-VMN95E

Recommend Loading

47,000 Ω

Output Voltage

4.0 mV (at 1 kHz, 5 cm/sec)

Stylus

0.3 x 0.7 mil elliptical

Tracking Force

1.5 to 2.5 g (standard 2 g)

Headshell Weight

6.1 g

Headshell Overhang Adjustment

± 5 mm

	AT-LP5X_CG.pdf - AT-LP5X Caution Guide
	AT-LP5X_QSG.pdf - AT-LP5X Quick Start Guide
	AT-LP5X_UM_EN.pdf - AT-LP5X User Manual (English)
	AT-LP5X_UM_TC.pdf - AT-LP5X User Manual (Chinese)