Home / Professional Products / Mixers / Digital SmartMixer (Dante Network) - ATDM-1012DAN

Digital SmartMixer (Dante Network)

ATDM-1012DAN

Acoustic Echo Canceller and Web Interface
Connect to the Dante audio network


  • Equipped with a 22-input × 12-bus full-matrix mixer that includes 8 sub-input channels
  • 10 Mic/Line inputs including a discrete microphone preamplifier with high-quality sound (stereo linking possible for channels 7/8 and 9/10)
  • Supports Dante network audio, it can be connected for input and output audio with Dante devices
  • Up to two ES954 hanging-array microphones (sold separately) can be connected via the Mic inputs
  • 8 balanced outputs with BTL circuits
  • 2 unbalanced stereo outputs that allow output at Mic level
  • USB audio I/O (1 stereo input and 1 stereo output)
  • Equipped with an independent, 4-group SmartMixer that allows for a selection between gain sharing and gate modes
  • Equipped with an echo canceler (with up to 10 Mic inputs) and a noise canceler that can be used simultaneously
  • Includes a 4-band EQ (only Low Cut for sub-inputs) for each input channel, and a 12-band EQ for each output channel
  • Equipped with 10 compressors/DeEssers and eight 8-band feedback suppressors capable of insertion into each I/O channel
  • Includes a ducker for insertion into the 2 unbalanced stereo inputs
  • Limiters equipped for each output channel
  • Includes an oscillator function convenient for checking the audio of each output channel
  • Audio input/output settings can be configured on the front panel, whereas the advanced settings can be configured on a computer using Web Remote.
  • Allows for external control with IP Remote Protocol










    • audio technica ATDM-1012DAN
    • audio technica ATDM-1012DAN

    • ATDM-1012DAN Audio Specifications

    Frequency Response

    20 ~ 20,000 Hz (MIC -16 dBu) : +1.0/-1.0 dB
    20 ~ 20,000 Hz (MIC -60 dBu) : +1.0/-2.0 dB
    20 ~ 20,000 Hz (LINE 24 dBu) : +1.0/-1.0 dB
    20 ~ 20,000 Hz (LINE -40 dBu) : +1.0/-2.0 dB
    Dynamic Range (Typical)

    112 dB or higher, A-weighted/ST
    Signal-To-Noise Ratio

    92 dB or higher, A-weighted/ST
    Headroom

    20 dB or higher
    Equivalent Input Noise

    -127 dBu or less, Rs = 150 ohm, DIN
    Common-mode Rejection Ratio

    80 dB or high, 1 kHz
    Noise

    -88 dBu or less, A-weighted
    Maximum Gain

    64 dB
    Channel Separation

    -80 dB or less, 1 kHz unity
    Total Harmonic Distortion

    0.03% or less, 1 kHz unity
    Audio Input

    MIC max.: 0 dBu
    MIC unity: -40 dBu
    LINE max.: +24 dBu
    LINE unity: +4 dBu/0 dBV/-10 dBV/-20 dBV
    ST max.: +20 dBV
    ST unity: 0 dBV/-10 dBV/-20 dBV
    Audio Output

    OUTPUT 1~8 max.: +24 dBu/+20 dBV/+10 dBV
    OUTPUT 1~8 unity: +4 dBu/0 dBV/-10 dBV
    OUTPUT ST max.: +20 dBV/+10 dBV/-13 dBV
    OUTPUT ST unity: 0 dBV/-10 dBV/-33 dBV

    ATDM-1012DAN General Specifications

    Power Supply

    100 ~ 240 V AC (50/60 Hz)
    Rating Capacity

    65 W
    Operating Temperature Range

    0 ~ 40° C
    Operating Humidity Range

    25 ~ 85% (No frost)
    Dimensions

    482.6 mm × 44 mm × 324.3 mm (W×H×D)
    Weight

    3.6 kg

    ATDM-1012DAN Other Specifications

    Phantom Power

    +48V DC
    Input Attenuation

    -24 dB
    Input Connections

    MIC/LINE INPUT 1 ~ 10 Euroblock connectors (3-pin)
    ST INPUT 1/2 Euroblock connectors (3-pin)
    Output Connector

    OUTPUT 1~8 Euroblock connectors (3-pin)
    ST OUTPUT 1/2 Euroblock connectors (3-pin)
    Network

    Dante Primary/Secondary ports
    Controls

    IP protocol: RJ-45 × 1 pc
    IP address: 192.168.33.102 (default)
    Communication speed: 100 Mbps
    Link Connector

    IP protocol: RJ-45 × 4 pc
    Communication speed: 100 Mbps
    USB Connect

    Channel: Stereo input x 1 ch, stereo output x 1 ch (24-bit)
    Communication speed: High-speed (480 Mbps)
    AD/DA

    Resolution: 24-bit
    Dynamic range: 115 dB
    Accessories Furnished

    Euroblock connector x 22, Power cable

    ATDM-1012DAN Input/Output Specifications

    Input Connections

    1 ~ 10 (MIC) -
    Gain: 20 ~ 60 dB;
    Load impedance : 1.6 kΩ;
    Input level - MIN : -60 dBu;
    Input level - TYP : -40 dBu;
    Input level - MAX : -20 dBu;
    Connector : Euroblock (BAL)

    1 ~ 10 (LINE) -
    Gain: 20 ~ 60 dB;
    Load impedance: 10 kΩ;
    Input level - MIN : -40 dBu;
    Input level - TYP : +4 dBu/0 dBV/-10 dBV/-20 dBV;
    Input level - MAX : +24 dBu;
    Connector : Euroblock (BAL)

    ST 1/2 (L/R) -
    Load impedance : 10 kΩ;
    Input level - TYP : 0 dBV/-10 dBV/-20 dBV;
    Input level - MAX : +20 dBV;
    Connector : Euroblock (UNBAL)
    Output Connector

    BAL 1 ~ 8 -
    Load impedance : 150Ω;
    Input level - TYP : +4 dBu/-10 dBV/0 dBV;
    Input level - MAX : +24 dBu;
    Connector : Euroblock (BAL)

    UNBAL 1/2 (L/R) -
    Load impedance: 150Ω;
    Input level - TYP : 0 dBV/-10 dBV/-33 dBV;
    Input level - MAX : +20 dBu;
    Connector : Euroblock (UNBAL)

    Download

    audio technica support Locate_V1.0.3.zip - Locate Apps for Windows and OSX
    audio technica support ATDM-1012_UM_EN.pdf - ATDM-1012DAN User Manual
    audio technica support ATDM-1012_QSG.pdf - ATDM-1012DAN Quick Start Guide
    audio technica support ATDM-1012DAN_SS.dwg - ATDM-1012DAN Appearance (DWG)
    audio technica support ATDM-1012DAN_SS.pdf - ATDM-1012DAN Appearance (PDF)
    • Social