Dual Moving Coil Cartridge

AT-MONO3/LP
  • Dual moving coil cartridge designed specifically for use with mono vinyl records
  • Aluminum cantilever with 0.6 mil conical stylus
  • Strong, rigid body construction of die-cast aluminum alloy and synthetic resin
  • PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer
  • Compatible with stereo playback systems

    * Warranty service WILL NOT be provided for this product.

    The AT-MONO3/LP is a high-output (1.2 mV) moving coil cartridge designed specifically for use with mono vinyl records. Due to the horizontal configuration of its PCOCC (Pure Copper by Ohno Continuous Casting) voice coils, the AT-MONO3/LP cartridge only generates electrical signal with horizontal movement, yet it also has appropriate compliance in the vertical direction, making it safe for use with stereo records. The voice coils are wired in series, resulting in one mono signal that is transmitted to the cartridge’s white-blue terminals and red-green terminals in order to feed both inputs of a stereo phono preamp.


  • AT-MONO3/LP Specifications

    Type

    MC type

    Playback Frequency Range

    20 ~ 20,000Hz

    Output Voltage

    1.2mV (1kHz and 5cm/sec.)

    Channel Separation

    30dB (1kHz)

    Tracking Force

    1.5 - 2.5g (2.0g standard)

    Coil Impedance

    40Ω (1kHz)

    Direct Current Resistance

    40Ω

    Cantilever

    Aluminum pipe

    Load Impedance

    400 ~ 47,000 Ω (amplifier connection)

    Coil Inductance

    190 μH (1kHz)

    Static Compliance

    20 x 10-6cm/dyne

    Dynamic Compliance

    7 x 10-6cm/dyne (100Hz)

    Stylus

    0.6 mil conical

    Vertical Tacking Angle

    23°

    Dimensions

    H16 x W16.6 x D26.5 (mm)

    Weight

    6.8 g

    Accessories Furnished

    Non-magnetic screwdriver; washer × 2; nut × 2;
    cartridge installation screws (13 mm × 2, 20 mm × 2);
    plastic protector; brush; PCOCC lead wire set