Home / Professional Products / Professional Microphones / Cardioid Condenser Gooseneck Microphone with 5-Pin Desk Stand Power Module - ES925C/DS5

Cardioid Condenser Gooseneck Microphone with 5-Pin Desk Stand Power Module

ES925C/DS5
  • Modular microphone system includes a microphone element, gooseneck and power module – each interchangeable with components from other ES Modular Microphones
  • Desk stand and element housing both feature a highly visible, two-state RGB LED status indicator
  • Logic I/O capability permits control of remote devices from the desk stands touch-sensitive capacitive-type user switch
  • Capacitive touch switch can be set to any one of three operating modes: touch-on/touch-off, touch-to-talk and touch-to-mute
  • Designed for professional sound reinforcement and other commercial sound applications
  • Interchangeable condenser microphone elements provide full-range, natural sound
  • Low-profile element provides uniform cardioid polar pattern with 120° acceptance angle
  • Heavy die-cast construction and no-slip bottom pads minimize coupling of surface vibration to the microphone
  • Local/remote switching operation enables independent microphone audio and control output
  • Available interchangeable elements permit angle of acceptance from 90° to 360°
  • Small-diameter gooseneck design permits highly flexible positioning
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Integral UniSteep® filter provides steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Includes foam windscreen
  • Available in six lengths

    The ES925C/DS5 is a modular microphone system designed for professional sound reinforcement and other commercial sound applications. It includes a cardioid condenser microphone element, gooseneck and a desk stand power module.

    The ES925C/DS5 microphone’s low-profile element provides a uniform cardioid polar pattern with a 120° acceptance angle. It comes with a foam windscreen to protect against plosives. The microphone element attaches to the small-diameter gooseneck, which offers highly flexible positioning while maintaining a well-contoured appearance. The desk stand power module features heavy die-cast construction and no-slip bottom pads to minimize coupling of surface vibration to the microphone. It is equipped with a touch-sensitive capacitive-type user switch with local and remote switching options. Locally, it can be set to any one of three operating modes: “touch-on/touch-off,” “touch-to-talk” and “touch-to-mute.” For enhanced control in conference and boardroom installations, the unit’s external contact closure allows you to trigger an external device, such as a camera or the lighting, from the switch. The desk stand is also equipped with a UniSteep® filter that provides steep low-frequency attenuation to improve sound pickup without affecting vocal reproduction quality. Both the desk stand and the microphone element housing feature a highly visible, two-state RGB LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference.

    The ES925C/DS5 is available in the following models and lengths:
    • ES925C6/DS5: 150.6 mm
    • ES925C12/DS5: 258.0 mm
    • ES925C15/DS5: 334.2 mm
    • ES925C18/DS5: 410.4 mm
    • ES925C21/DS5: 486.6 mm
    • ES925C24/DS5: 562.8 mm


    • audio technica ES925C/DS5
    • audio technica ES925C/DS5

    • ES925C/DS5 Specifications

    Element

    Fixed-charge back plate permanently polarized condenser
    Polar Pattern

    Cardioid
    Frequency Response

    30 ~ 20,000 Hz
    Low Frequency Roll-Off

    80 Hz, 18 dB/octave
    Open Circuit Sensitivity

    -40 dB (10.0 mV) re 1V at 1 Pa
    Impedance

    130 Ω
    Maximum Input Sound Level

    140 dB SPL, 1 kHz at 1% T.H.D.
    Dynamic Range (Typical)

    112 dB, 1 kHz at Max SPL
    Signal-To-Noise Ratio

    66 dB, 1 kHz at 1Pa
    Switch

    Control switch;
    LED color selector;
    Low cut: on/off;
    Switch function: touch on/off, momentary on, momentary off;
    Control: local, remote, LED remote
    Phantom Power

    22-52V DC, 8 mA
    Controls

    Closure input voltage : -0.5 ~ 5.5 V;
    Maximum permissible power : 200 mW;
    On-resistance : 100 ohms
    LED Indicators

    Active : high (+5V DC) TTL compatible / low (+1.2V DC) or lower;
    Maximum permissible input power -0.5 - 5.5 V;
    Maximum permissible power 200 mW
    Weight

    ES925C6/DS5: 674 g;
    ES925C12/DS5: 698 g;
    ES925C15/DS5: 703 g;
    ES925C18/DS5: 708 g;
    ES925C21/DS5: 713 g;
    ES925C24/DS5: 718 g
    Dimensions

    ES925C6/DS5: 150.6 mm (H) x 97 mm (W) x 130 mm (D);
    ES925C12/DS5: 258.0 mm (H) x 97 mm (W) x 130 mm (D);
    ES925C15/DS5: 334.2 mm (H) x 97 mm (W) x 130 mm (D);
    ES925C18/DS5: 410.4 mm (H) x 97 mm (W) x 130 mm (D);
    ES925C21/DS5: 486.6 mm (H) x 97 mm (W) x 130 mm (D);
    ES925C24/DS5: 562.8 mm (H) x 97 mm (W) x 130 mm (D)
    Output Connector

    TB5M-type
    Accessories Furnished

    7.6 m Microphone cable (TA5F, unterminated);
    Windscreen AT8109a;
    Set screw (M2×4 mm) 2 pcs.;
    Hex wrench (0.89 mm)

    Download

    audio technica support ES925_DS5_QSG.pdf - ES925_DS5 Quick Start Guide
    audio technica support ES925C_DS5_UM_EN.pdf - ES925C/DS5 User Manual
    audio technica support ES925C_DS5_UM_TC.pdf - ES925C/DS5 User Manual (Chinese)
    • Social