Guitar Mounting System

ATM350GL
  • Low-profile design for minimum visibility.
  • Crisp, clear, well-balanced microphone response, even at high SPLs
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • UniMount® guitar mount with thumbscrew-adjustable clamp attaches securely to guitars and other stringed instruments with body depths of 90-135 mm, and provides excellent shock resistance for the microphone
  • Rugged UniMount® 9" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
  • In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
  • Interchangeable elements available for hypercardioid and omnidirectional polar patterns
  • Included violin mount with hook-and-loop fastener provides an additional mounting option

    Designed for use with guitars, the ATM350GL UniMount® mounting system gives you the tools to perform with confidence. The system features the ATM350a cardioid condenser microphone, a high-SPL mic that provides a clear, well-balanced response from any instrument. When teamed with the included AT8491G guitar mount and strong, flexible AT8490L 9" gooseneck, the mic can be securely fastened to a guitar or other stringed instrument with a body depth of 90-135 mm.

  • ATM350GL Specifications

    Element

    Fixed-change back plate permanently polarized condenser

    Polar Pattern

    Cardioid

    Frequency Response

    40 ~ 20,000 Hz

    Low Frequency Roll-Off

    80 Hz, 12 dB/octave

    Open Circuit Sensitivity

    -49 dB (3.5 mV) re 1V at 1 Pa

    Impedance

    200 Ω

    Maximum Input Sound Level

    159 dB SPL, 1 kHz at 1% T.H.D.

    Dynamic Range (Typical)

    130 dB, 1 kHz at Max SPL

    Signal-To-Noise Ratio

    65 dB, 1 kHz at 1 Pa

    Phantom Power

    11-52V DC, 3.5 mA typical

    Switch

    Flat, roll-off

    Weight

    MICROPHONE - 14.5 g; POWER MODULE - 90 g

    Dimensions

    MICROPHONE - 37.8 mm - long, 12.2 mm - diameter POWER MODULE - 92 mm - long, 18.9 mm - diameter

    Output Connector

    Integral 3-pin XLRM-type

    Cable

    4.0 m long (permanently attached to microphone), 3.2 mm diameter, 2-conductor shielded cable with HIROSE HR10-type connector

    Accessories Furnished

    AT8543 power module; AT8491G Uni-Mount® guitar mount; AT8490L 9-inch gooseneck; AT8468 violin mount; protective carrying case

    Download

    audio technica support ATM350a_Manual.pdf - User Manual