No description

Interpretation Unit

ATUC-50INT

  • Body is similar in appearance to the ATUC-50DU, but designed for use by interpreters in bilingual or trilingual discussion applications
  • Enables monitoring of floor or alternate language
  • Interpretation can be output to one of up to three different language channels
  • Up to six ATUC-50INTs can be included in a chain or ring of ATUC-50DUs (total of 50 units per ATUC-50CU)
  • Two ATUC-50INT units may be linked to provide hardware redundancy for a particular language feed
  • High-visibility indicators associated with the headphone volume adjustment buttons and monitor channel selection buttons
  • 2 ports of RJ-45 for connecting discussion units and 1 expansion RJ-11 port for future option
  • A headphone output jack with a monitoring channel switch function

     

  • ATUC-50INT Specifications

    Connecting Terminals
    Inputs : Mic × 1
    Outputs : Headphones × 1
    CHAIN : DU/CU connection terminals
    Bit Depth
    24 bit
    Sample Rate
    48kHz
    Frequency Response
    +1.0, -2.0dB, 20 ~ 20,000 Hz, refer to +4dBu output @1kHz
    Dynamic Range (Typical)
    107dB A-Weighted
    Signal-To-Noise Ratio
    87dB A-Weighted
    Headroom
    20dB
    Noise
    < -121dBu 、 Rs=150ohm
    Total Harmonic Distortion
    Less than 0.07% @1kHz unity
    Phantom Power Requirements
    DC+24V
    Power Supply
    DC+48V
    Current / Power Consumption
    2.2W
    Operating Temperature Range
    0~40℃ (Operation humidity 25~85%)
    Dimensions
    135mm(W) × 148.3mm(D) × 84.2mm(H)
    Weight
    570 g (900 g including the optional bottom weight)