Home / Professional Products / Professional Microphones / Cardioid Condenser Handheld Microphone - AE3300
No description

Cardioid Condenser Handheld Microphone

AE3300

The quality of the famous AT4033 in a stage mic

  • Exceptional performance for exceptional performers
  • Same element as the classic AT4033 studio microphone
  • Superior anti-shock engineering ensures low handling noise and quiet performance
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
  • Robust all-metal design for enduring dependability on the road
  • Integral 80 Hz HPF switch and 10 dB pad

    With pristine audio quality, ultra-low handling noise, and high-frequency clarity, Audio-Technica's AE3300 gives voice to the subtleties of vocal performance. This cardioid condenser vocal microphone features the condenser element used in the legendary AT4033 and proven in the world's finest recording studios. The hardened-steel outer grille is lined with fine steel mesh and a layer of open-cell foam for ultimate protection against vocal plosives without compromising high-frequency clarity. Its superior anti-shock engineering ensures low handling noise and quiet performance. For exceptional performance. For exacting detail. For brilliant clarity: AE3300. it's the new standard in live audio.

    • AE3300 Specifications

    Element

    Fixed-charge back plate, permanently polarized condenser
    Polar Pattern

    Cardioid
    Frequency Response

    30 ~ 18,000 Hz
    Low Frequency Roll-Off

    80 Hz, 12 dB/octave
    Open Circuit Sensitivity

    -42 dB (7.9 mV) re 1V at 1 Pa
    Impedance

    150 Ω
    Maximum Input Sound Level

    147 dB SPL, 1 kHz at 1% T.H.D.
    157 dB SPL, with 10 dB pad (normal)
    Noise

    19 dB SPL
    Dynamic Range (Typical)

    128 dB, 1 kHz at Max SPL
    Signal-To-Noise Ratio

    75 dB, 1 kHz at 1 Pa
    Phantom Power

    11-52V DC, 3 mA typical
    Switch

    High-pass filter; 10 dB pad (nominal)
    Weight

    300 g
    Dimensions

    179.0 mm long, 48.0 mm head diameter,
    33.0 mm to 22.0 mm tapered body diameter
    Output Connector

    Integral 3-pin XLRM-type
    Accessories Furnished

    AT8470 Quiet-Flex™ stand clamp for 5/8＂-27 threaded stands;
    5/8＂-27 to 3/8＂-16 threaded adapter;
    soft protective pouch

    Download

    audio technica support AE3300.pdf - AE3300 User Manual
    • Social