Digital High-Fidelity Dual Body-pack Wireless System

  • Configuration with ATW-R1100 receiver and ATW-T1001 UniPak® transmitter
  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
  • 2.4 GHz range – completely free from TV interference
  • Receiver units can be docked in the chassis or mounted remotely (up to 100m) via Ethernet cable for added versatility
  • Three levels of diversity assurance: frequency, time, and space
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync, and set-up
  • State-of-the-art digital receiver for reliable performance
  • Balanced XLR and unbalanced 1/4” output jacks with level control

    Audio-Technica’s System 10 PRO rack-mount digital wireless system provides wireless that’s so simple to use, so dependable, and so automatic, you never have to think about it. Set it up anywhere, turn it on and it’s good to go.

    System 10 PRO delivers interference-free operation in the 2.4 GHz range (i.e., outside TV bands) with many  innovative features for ultimate versatility. The durable half-rack chassis houses two receiver units that can be  operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable.  Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a  stable, multichannel system with the simultaneous use of up to 10 channels.

    Like all the products in the System 10 wireless family, the System 10 PRO rack-mount features 24-bit/48kHz operation,  easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time and space.

    • audio technica ATW-1311
    • audio technica ATW-1311
  • System 10 Pro Overall System Specifications

    Operating Frequencies

    2.4 GHz ISM band

    Dynamic Range (Typical)

    >109 dB (A-weighted)

    Total Harmonic Distortion

    <0.05% typical

    Operating Range

    60 m typical (Open range environment with no interfering signals)

    Operating Temperature Range

    0° C to +40° C (32° F to 104° F) (Battery performance may be reduced at very low temperatures)

    Frequency Response

    20 ~ 20,000 Hz (Depending on microphone type)

    Sample Rate

    24 bit / 48 kHz


    3.8 ms

    ATW-RU13 Receiver Unit

    Receiving System

    Diversity (frequency/time/space)


    57.0mm x 19.0mm x 77.6mm (W x H x D)


    64 g

    Remote Receiver Connector


    Accessories Furnished

    Antennas, AT8690 RU13 holder


    1/4\" x 20

    ATW-RC13 Receiver Chassis

    Maximum Output Level

    Balanced: 0 dBV (XLRM)
    Unbalanced: +6 dBV (6.3mm jack)

    Power Supply

    12V DC, 0.5A with 100~240V AC adapter


    209.8 mm x 44 mm x 169.3 mm (W x H x D)


    940 g

    Remote Receiver Connector


    Link Connector


    Accessories Furnished

    AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet

    ATW-T1001 UniPak® Body-Pack Transmitte

    RF Power Output

    10 mW

    Spurious Emissions

    Following federal and national regulations

    Input Connections

    Four-pin Locking Connector
    Pin 1: GND; Pin 2: INST INPUT;
    Pin 3: MIC INPUT; Pin 4: DC BIAS +9V

    Battery Type

    Two 1.5V AA alkaline

    Battery Current / Life

    >7 hours (depending on battery type and use pattern)


    70.2mm x 107.0mm x24.9mm (W x H x D)


    100 g


    audio technica support System10PRO_Brochure_CN.pdf - System 10 Pro Brochure (Simplified Chinese)
    audio technica support ATW-1300_UM_EN.pdf - ATW-1300 Operation Manual
    audio technica support ATW-1300_UM_TC.pdf - ATW-1300 Operation Manual (Chinese)