Home / Professional Products / Professional Microphones / Active Antenna Combiner Kit - ATW-49CB
No description

Active Antenna Combiner Kit

ATW-49CB
  • Each kit includes: two dual-input, one-output Active Antenna Combiners; two 18" BNC-to-BNC RG 58 coaxial antenna cables
  • One set of Active Antenna Combiners enables two sets of antennas to feed one wireless receiver or distribution system
  • Each Active Antenna Combiner is a broadband device (frequency range from 440 to 900 MHz) that combines two incoming RF signals into one outgoing RF signal
  • Designed for use with Audio-Technica 5000, 4000, 3000 and 2000 Series UHF wireless receivers and ATW-A49 LPDA antennas
  • The Active Antenna Combiner provides unity gain to compensate for RF signal loss associated with combining signals
  • Also suitable for use with a variety of other receivers and antennas

    The Audio-Technica ATW-49CB Active Antenna Combiner Kit includes two dual-input, one-output Active Antenna Combiners designed for use with Audio-Technica 4000 and 5000 Series UHF wireless receivers and ATW-A49 LPDA antennas.

    Each Active Antenna Combiner is a broadband device (frequency range from 440 to 900 MHz) that combines two incoming RF signals into one outgoing RF signal. One set of Active Antenna Combiners enables two sets of antennas to feed one wireless receiver or distribution system. To compensate for RF signal loss associated with combining signals, the Active Antenna Combiner provides unity gain.

    (Note that without the use of an antenna preamplifier, long antenna-cable length may deteriorate signal.)

    • ATW-49CB Specifications

    Type

    2-input Active Combiner
    Bandwidth

    440 MHz ~ 900 MHz
    VSWR

    < 1.7:1 (within specified bandwidth)
    Gain

    0 dB typical (within specified bandwidth)
    Impedance

    50 Ω, typical (within specified bandwidth)
    Weight

    51 g
    Dimensions

    61.0mm W x 47.0mm L x 23.0mm H
    Power Supply

    5 - 14V DC
    Current Consumption

    30 mA @ 12V DC
    Finish on Enclosure

    Chemical film per MIL C 5541
    Materal

    6063T52 extruded aluminum (sides) 5052-H32 aluminum (top and bottom)
    Pass-through Current

    100 mA (maximum to both inputs combined)

    Download

    audio technica support 306_1_ATW-49CB_OM.pdf - Operation Manual
    • Social