Dual-element Line-cardioid Condenser Microphone (with Remote Switching and LED)

AT882TL/D3RC5
  • Designed for high-quality sound reinforcement, conferencing, professional recording and other demanding sound pickup applications
  • Dual-element Line-cardioid condenser microphone with two independent power modules
  • A rubber switch with LED allows users to control for remote devices (ATUC-50IU) of Left channel
  • Integral, phantom-powered, Red LED indicator
  • Integral windscreens ensure ultimate security against wind noise and plosives
  • Sturdy metal housing design with ball-in-socket base permits flexible positioning
  • Heavy die-cast case and rubber bottom pads minimize coupling of surface vibration to he microphones




  • AT882TL/D3RC5 Specifications

    Element

    Dual back electret condenser

    Polar Pattern

    Line-cardioid (Unidirectional)

    Frequency Response

    20 ~ 20,000 Hz

    Open Circuit Sensitivity

    -31 dB (28.2 mV) re 1V at 1 Pa

    Impedance

    100 Ω

    Maximum Input Sound Level

    126 dB SPL (1 kHz THD 1%)

    Signal-To-Noise Ratio

    >69 dB, 1 kHz at 1 Pa

    Phantom Power

    11-52V DC, 2 mA typical

    Switch

    Push button : Left Channel - Contact closure control

    Control Voltage Out

    Closed circuit in switch pressed;
    Left Channel - Opened circuit when not pressed

    LED Indicators

    Light up when high (+5V DC), Unlit when low (0V DC),
    Maximum input voltage : -0.5V to 5.5V

    Weight

    1.22 kg

    Dimensions

    214mm - Long, 227mm Max. height, 102mm Width

    Output Connector

    3-pin XLRM-type (Right channel - direct output);
    Unterminated 5-wires (Left channel direct output with control)

    Cable

    2 x 1.0 m long (permanently attached to microphone)

    Download

    audio technica support AT882TL_D3RC5.pdf - AT882TL/D3RC5 User Manual
    audio technica support AT882TL D3RC5 & DS3RC5 Layout drawing.DWG - AT882TL/D3RC5 Appearance (DWG)
    audio technica support AT882TL D3RC5 & DS3RC5 Layout drawing.PDF - AT882TL/D3RC5 Appearance (PDF)