Home / Professional Products / Professional Microphones / Hypercardioid Condenser Gooseneck Microphone with 5-Pin Flush-Mount Power Module - ES925H/FM5

Hypercardioid Condenser Gooseneck Microphone with 5-Pin Flush-Mount Power Module

ES925H/FM5
  • Modular microphone system includes a microphone element, gooseneck and power module – each interchangeable with components from other ES Modular Microphones
  • Flush-mount power module and element housing both feature a highly visible, two-state RGB LED status indicator
  • Logic I/O capability permits control of remote devices from the power module‘s touch-sensitive capacitive-type user switch
  • Power module with 5-pin XLR output mounts unobtrusively in tabletops
  • Designed for professional sound reinforcement and other commercial sound applications
  • Interchangeable condenser microphone elements provide full-range, natural sound
  • Low-profile element provides uniform hypercardioid polar pattern with 100° acceptance angle
  • Included isolators provide mechanical dampening of mounting surface vibration
  • Available interchangeable elements permit angle of acceptance from 90° to 360°
  • Small-diameter gooseneck design permits highly flexible positioning
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Includes foam windscreen
  • Available in six lengths

    The ES925H/FM5 is a modular microphone system designed for professional sound reinforcement and other commercial sound applications. It includes a hypercardioid condenser microphone element, gooseneck and a 5-pin flush-mount power module.

    The ES925H/FM5 microphone’s low-profile element provides a uniform hypercardioid polar pattern with a 100° acceptance angle. It comes with a foam windscreen to protect against plosives. The microphone element attaches to the small-diameter gooseneck, which offers highly flexible positioning while maintaining a well-contoured appearance. The 5-pin flush-mount power module is equipped with a touch-sensitive capacitive-type user switch. For enhanced control in conference and boardroom installations, the unit’s external contact closure allows you to trigger an external device, such as a camera or the lighting, from the switch. The power module mounts unobtrusively in tabletops and comes with isolators that provide mechanical dampening of the mounting surface. Both the power module and the microphone element housing feature a highly visible, two-state RGB LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference.

    The ES925H/FM5 is available in the following models and lengths:
    • ES925H6/FM5: 207.6 mm
    • ES925H12/FM5: 315.0 mm
    • ES925H15/FM5: 391.2 mm
    • ES925H18/FM5: 467.4 mm
    • ES925H21/FM5: 543.6 mm
    • ES925H24/FM5: 619.8 mm


    • audio technica ES925H/FM5

    • ES925H/FM5 Specifications

    Element

    Fixed-charge back plate permanently polarized condenser
    Polar Pattern

    Hypercardioid
    Frequency Response

    30 ~ 20,000 Hz
    Open Circuit Sensitivity

    -40 dB (10.0 mV) re 1V at 1 Pa
    Impedance

    130 Ω
    Maximum Input Sound Level

    140 dB SPL, 1 kHz at 1% T.H.D.
    Dynamic Range (Typical)

    112 dB, 1 kHz at Max SPL
    Signal-To-Noise Ratio

    66 dB, 1 kHz at 1Pa
    Switch

    Mic On/Off;
    LED color selector
    Phantom Power

    22-52V DC, 8 mA
    Controls

    Closure input voltage : -0.5 ~ 5.5 V;
    Maximum permissible power : 200 mW;
    On-resistance : 100 ohms
    LED Indicators

    Active : high (+5V DC) TTL compatible / low (+1.2V DC) or lower;
    Maximum permissible input power -0.5 - 5.5 V;
    Maximum permissible power 200 mW
    Weight

    ES925H6/FM5: 110 g;
    ES925H12/FM5: 134 g;
    ES925H15/FM5: 139 g;
    ES925H18/FM5: 144 g;
    ES925H21/FM5: 149 g;
    ES925H24/FM5: 154 g
    Dimensions

    ES925H6/FM5: 207.6 mm (H) x 38 mm (W) x 48 mm (D);
    ES925H12/FM5: 315.0 mm (H) x 38 mm (W) x 48 mm (D);
    ES925H15/FM5: 391.2 mm (H) x 38 mm (W) x 48 mm (D);
    ES925H18/FM5: 467.4 mm (H) x 38 mm (W) x 48 mm (D);
    ES925H21/FM5: 543.6 mm (H) x 38 mm (W) x 48 mm (D);
    ES925H24/FM5: 619.8 mm (H) x 38 mm (W) x 48 mm (D)
    Output Connector

    5-Pin XLRM-type
    Accessories Furnished

    Isolator 1 pair; Nut;
    Windscreen AT8109a;
    Set screw (M2×2 mm) 2 pcs.;
    Hex wrench (0.89 mm)
    • Social