MicroSet® Omnidirectional Cond. Headworn Mic.

BP892
  • Industry-standard sound quality—extremely intelligible natural audio for stage/television talent, lecturers, houses of worship
  • Handles high sound pressure levels with ease
  • Microphone diameter of just 2.6 mm for the ultimate in low-profile, highperformanceaudio
  • Comes equipped with AT8464 Dual-Ear Microphone Mount that converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort
  • Locking 4-pin microphone output connector compatible with included powermodule and all Audio-Technica UniPak® body-pack wireless transmitters
  • UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Offered in black and beige (-TH) models
  • Also available in wireless models (without power module) terminated for use with all Audio-Technica UniPak® wireless systems and many other manufacturers' wireless systems

    The BP892 is a headworn condenser microphone with an omnidirectional polar pattern. It is designed to provide intelligible natural audio for stage and television talent, lecturers and houses of worship.



    • audio technica BP892
    • audio technica BP892
  • BP892 Specifications

    Element

    Condenser

    Polar Pattern

    Omnidirectional

    Frequency Response

    20 ~ 20,000 Hz

    Low Frequency Roll-Off

    80 Hz, 18 dB/octave

    Open Circuit Sensitivity

    -49 dB (3.5 mV) re 1V at 1 Pa

    Impedance

    250 Ω

    Maximum Input Sound Level

    135 dB SPL, 1 kHz at 1% T.H.D.

    Dynamic Range (Typical)

    104 dB, 1 kHz at Max SPL

    Signal-To-Noise Ratio

    63 dB, 1 kHz at 1 Pa

    Phantom Power

    11-52V DC, 2 mA typical

    Switch

    Flat, roll-off

    Weight

    Microphone, boom & earpiece: 2.6 g;
    Power module (wired only): 85 g

    Dimensions

    Microphone: 8.1 mm long, 2.6 mm diameter
    Boom: 98.4 mm long, 1.07 mm diameter
    Power module: 97.6 mm long, 18.9 mm diameter

    Output Connector

    Integral 3-pin XLRM-type (power module)

    Cable

    1.4 m long, 1.6 mm diameter, 2-conductor shielded cable with locking 4-pin connector

    Accessories Furnished

    AT8539 power module;
    AT8440 cable clip;
    AT8464 dual-ear mount;
    two AT8157 windscreens;
    two AT8156 element covers;
    moisture guard;
    carrying case

    Download

    audio technica support BP892.pdf - Operation Manual