Universal Mounting System - short

ATM350U
  • Low-profile design for minimum visibility.
  • Crisp, clear, well-balanced microphone response, even at high SPLs
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • UniMount® universal clip-on mount attaches securely to instrument bell and provides excellent shock resistance for the microphone
  • Rugged UniMount® 5" gooseneck rigidly holds its shape, keeping microphone accurately positioned even during aggressive play
  • In-line power module is equipped with a switchable 80 Hz high-pass filter to control undesired ambient noise
  • Interchangeable elements available for hypercardioid and omnidirectional polar patterns
  • Included violin mount with hook-and-loop fastener provides an additional mounting option

    With a 5" gooseneck and universal clip-on mount, the ATM350U is ideal for brass and sax players, yet is versatile enough to fit nearly any application. The mount features strong, rubber-lined clamping jaws and a locking screw to securely fasten the mount to the bell of your instrument or other surface. The socket screw locks the gooseneck to the mount, giving you the flexibility to position the mic exactly where you want it and the confidence to play freely, knowing that the mic will stay in place, no matter how much you move about.

  • ATM350U Specifications

    Element

    Fixed-change back plate permanently polarized condenser

    Polar Pattern

    Cardioid

    Frequency Response

    40 ~ 20,000 Hz

    Low Frequency Roll-Off

    80 Hz, 12 dB/octave

    Open Circuit Sensitivity

    -49 dB (3.5 mV) re 1V at 1 Pa

    Impedance

    200 Ω

    Maximum Input Sound Level

    159 dB SPL, 1 kHz at 1% T.H.D.

    Dynamic Range (Typical)

    130 dB, 1 kHz at Max SPL

    Signal-To-Noise Ratio

    65 dB, 1 kHz at 1 Pa

    Phantom Power

    11-52V DC, 3.5 mA typical

    Switch

    Flat, roll-off

    Weight

    MICROPHONE : 14.5 g;
    POWER MODULE : 90 g

    Dimensions

    MICROPHONE - 37.8 mm - long, 12.2 mm - diameter POWER MODULE - 92 mm - long, 18.9 mm - diameter

    Output Connector

    Integral 3-pin XLRM-type

    Cable

    4.0 m long (permanently attached to microphone), 3.2 mm diameter, 2-conductor shielded cable with HIROSE HR10-type connector

    Accessories Furnished

    AT8543 power module; AT8491U Uni-Mount® universal clip-on mount; AT8490 5-inch gooseneck; AT8468 violin mount; protective carrying case

    Download

    audio technica support ATM350a_Manual.pdf - User Manual
    audio technica support ATM350a_brochure-en.pdf - Produce Brochure (Eng)
    audio technica support ATM350a_Brochure-cs.pdf - Produce Brochure (Chinese)