Home / Professional Products / Professional Microphones / Wireless In-Ear Monitor System - M2

Wireless In-Ear Monitor System

M2
  • High-fidelity sound with clean, articulate mix allows you to hear yourself better at lower volume
  • 100 selectable UHF channels
  • Up to 10 simultaneous systems per frequency band
  • Three receiver modes: Personal Mix, stereo, and mono
  • Personal Mix Control allows volume and mix control of two independent signals at the receiver
  • 3.5 mm line-in jack connects to ambient microphone, click track & more
  • LED indicators provide easy-to-read level monitoring
  • XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
  • Adjustable squelch eliminates annoying static
  • Pilot tone protects against RF interference when the transmitter is turned off
  • Limiter (defeatable) helps protect your hearing from sudden peaks
  • Portable system is quick to load and set up
  • Reduces on-stage audio clutter for better overall mix & less feedback
  • Use any number of M2R Stereo Receivers (with Personal Mix Control) on the same frequency
  • Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
  • Personal fit with 3 sizes of rubber eartips plus ear-conforming foam tips
  • Auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input.

    • audio technica M2

    • M2 Overall System Specifications

    Operating Frequencies

    Band H1: 754.000 to 787.000 MHz, 100 frequencies
    Minimum Frequency Step

    25kHz
    Modulation Mode

    FM stereo
    Normal Deviation

    ±40kHz
    Dynamic Range (Typical)

    90 dB, A-weighted
    Total Harmonic Distortion

    <1% at (1 kHz, ±20 kHz Deviation)
    Operating Range

    100 m, typical
    Operating Temperature Range

    -5°C ~ 50°C
    Frequency Response

    60 ~ 13,000 Hz (±3dB)
    Simultaneous Use

    10 channels per band (maximum recommended)

    M2R Stereo Receiver

    Receiving System

    Double conversion superheterodyne
    Sensitivity

    20 dBuV (at 60 dB S/N ratio, 50 ohms termination)

    Headphone Output

    3.5 mm stereo phone jack; 65 mW (at 32 ohms)
    Antenna Input

    SMA-type, 50 ohms
    Input Connections

    3.5 mm TRS stereo phone jack
    Battery Type

    2 x 1.5V AA (not included)
    Battery Current / Life

    8 hours (alkaline)

    Dimensions

    70.0mm x 25.0mm x 110.0mm (W x D x H)
    Weight

    110 g
    Current Consumption

    EP3 earphone; flexible antenna

    M2T Stereo Transmitter

    RF Power Output

    10 mW / 50 mW (switchable), 50 ohms

    Spurious Emissions

    Following federal and national regulations
    Input Connections

    XLRF-type/6.3 mm stereo (1/4\")
    Maximum Input Power

    +26dBu
    Output Connector

    XLRF-type/6.3 mm stereo (Loop output)
    Power Supply

    12-18VDC, 600mA
    Antenna Input

    Attached whip
    Dimensions

    210.0mm x 132.0mm x 44.0mm (W x D x H)
    Weight

    870 g
    Accessories Furnished

    AC adapter; rack mount adapters

    Download

    audio technica support m2-H1.pdf - Operation Manual (Chinese)
    • Social